Proper disinfection and filtration of the swimming pool water kills harmful micro-organisms, removes body fats and oils, and ensures the water is clean, safe and sparkling.

Swimming pool water should be tested prior to use and at least three times per week using a reliable pool water test kit, as advised by your pool supplier. When testing the following parameters should be measured; disinfection levels, pH and total alkalinity.

It is very important that the pump lint-pot and filter are cleaned regularly to ensure they do not become a source of contamination for the swimming pool water.

If a sand or diatomaceous earth filter is used, the water used to backwash (rinse) the filter must be disposed of into the sewer or into separate underground soakage if located in an unsewered area.

This entry was posted on Wednesday, June 11th, 2008 at 5:49 am and is filed under Architecture Design, Swimming pool. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.